当前位置:
Guidelines for Using the Collagen Light Beauty Device S16 [Intermediate Version]

Guidelines for Using the Collagen Light Beauty Device S16 [Intermediate Version]

Guidelines for Using the Collagen Light Beauty Device S16 [Intermediate Version]

2026-01-25 11:10 www.honghebusiness.com
QR code
26
Beauty Device User Guide

Beauty Device User Guide

Detailed operating steps and precautions to help you use your beauty device safely and effectively

1. Pre-Use Inspection & Preparation

No.Step NameSpecific OperationPrecautions
1Skin Condition Check1. Check face for open wounds, acne, eczema or dermatitis
2. Check for severe sensitivity or redness
3. Ensure no metal accessories or implants on face
Pause use if skin problems exist
2Environment Check1. Confirm use environment is dry
2. Ensure hands are dry
3. Prepare clean towel and mirror
Avoid bathroom or humid environments
3Device Check1. Check battery indicator (recommend full charge)
2. Check probe is clean without residue
3. Check device body for damage or abnormalities
Charge first if battery is low
4Accessory Preparation1. Prepare matching gel or serum
2. Prepare cotton pads or soft cloth
3. Prepare water and cleanser
Use original or specified skincare products

Friendly Reminder

Before first use, it's recommended to perform a skin test on your inner arm to confirm no allergic or discomfort reactions before using on your face.

2. Basic Operation Process

No.Step NameSpecific OperationKey Points
5Facial Cleansing1. Wash hands with gentle cleanser
2. Thoroughly cleanse face with cleanser
3. Gently pat face dry with towel
Avoid rubbing vigorously when cleansing
6Apply Medium1. Take appropriate amount of gel/serum (about 1-2 coin size)
2. Apply evenly to face and neck
3. Ensure coverage of all treatment areas
Apply sufficient thickness to avoid dry skin
7Power On Preparation1. Locate power button
2. Confirm comfortable grip posture
3. Ensure fingers won't accidentally touch other buttons
Read button instructions before first use
8Power On Device1. Press and hold power button for 3 seconds
2. Wait for indicator light/prompt sound
3. Confirm successful power on
Check battery or contact if no response

Important Safety Warning

Do not use the beauty device when skin is too dry or without sufficient skincare products applied, to avoid skin damage.

3. Mode Selection & Settings

No.Step NameSpecific OperationUsage Suggestions
9Select Function Mode1. Press mode button to switch to desired function
2. Check indicator light to confirm mode
3. Wait for mode ready prompt
Start with mildest mode for first use
10Intensity Adjustment1. Press intensity "+" button to increase level
2. Press intensity "-" button to decrease level
3. Start testing from lowest level
Aim for slight tingling, avoid pain
11Time Setting1. Check default time setting
2. Press time button if adjustment needed
3. Confirm countdown starts
Total single use time not exceeding 15 minutes

Mode Selection Suggestions

For first use, start from the lowest level to allow skin to gradually adapt. Dry/sensitive skin: start with import mode. Oily/combination skin: use cleaning mode more frequently.

4. Detailed Facial Care Steps

Treatment Order

Jawline Lift → Cheek Lift → Nasolabial Fold Reduction → Forehead Wrinkle Smoothing → Neck Care (Optional)

No.Treatment AreaSpecific Operation StepsTime/Repetitions
12Jawline Lift1. Start from chin center
2. Move slowly along jawline to below earlobe
3. Keep device close to skin, lift slowly
4. Repeat 5-10 times
1-2 min per side
13Cheek Lift1. Start from corner of mouth
2. Move diagonally upward 45° to middle of ear
3. From inside to outside, bottom to top lift
4. Repeat 8-10 times
2-3 min per side
14Nasolabial Fold Reduction1. Start from sides of nose wings
2. Lift diagonally upward to cheekbone
3. Move slowly in small area
4. Repeat 5-8 times
1 min per side
15Forehead Wrinkle Smoothing1. Move from between eyebrows upward to hairline
2. Move from eyebrows to temples
3. Keep horizontal or slightly upward angle
4. Repeat 5-6 times
1-2 minutes
16Neck Care1. Start from center of collarbone
2. Lift upward to below chin
3. Avoid Adam's apple area
4. Repeat 5-8 times
2-3 minutes

Technique Key Points

Device should be close to skin but don't press hard. Hold each movement for 3-5 seconds, don't slide quickly. Use same time and repetitions for both sides.

5. Special Function Operation Steps

Cleaning Mode
Deep cleans pores and removes makeup residue through sonic vibration and extraction function
2-3 times/week
Import Mode
Promotes skincare product absorption using microcurrent and ion import technology
Daily use
EMS Microcurrent Mode
Stimulates muscle movement through EMS microcurrent to lift facial contours and reduce fine lines
3-4 times/week
Cooling Mode
Cools and soothes skin, shrinks pores, relieves sensitivity and redness
As needed

Mode Combination Suggestions

You can combine different modes in each treatment, for example: Cleaning → Import → Lifting → Cooling, to form a complete skincare routine.

6. Post-Use Handling Steps

No.Step NameSpecific OperationPrecautions
21Power Off Device1. Press and hold power button for 3 seconds
2. Confirm all indicator lights are off
3. Wait for device to completely stop
Don't unplug directly or force shutdown
22Clean Face1. Rinse face gel with warm water
2. Use gentle cleanser
3. Gently pat dry with towel
4. Continue with skincare routine
Avoid using water that's too hot or cold
23Clean Device1. Wipe probe with damp soft cloth
2. Clean device surface
3. Dry with dry cloth
4. Check for residue
Never wash with water or soak
24Charging Management1. Connect original charger
2. Confirm charging indicator lights up
3. Unplug when fully charged
4. Record charging time
Fully charge before first use
25Storage1. Place in dedicated storage bag
2. Store in dry, cool place
3. Avoid direct sunlight
4. Avoid heavy pressure
Charge monthly if not used for long time

7. Special Situation Handling Steps

No.Situation DescriptionHandling StepsFollow-up Action
26Stinging During Use1. Stop using immediately
2. Lower intensity level
3. Check if skin is too dry
4. Add more gel or serum
Pause use if stinging continues
27Device No Response1. Check if battery is sufficient
2. Check if charging port is clean
3. Restart device
4. Check if in lock state
Contact after-sales service
28Skin Redness1. Stop using immediately
2. Cool skin with ice
3. Use soothing skincare products
4. Pause use for 1-2 days
See doctor if redness persists
29Insufficient Gel1. Pause device
2. Apply more gel
3. Ensure even coverage
4. Continue use
Always keep skin moist

Emergency Situation Handling

If you feel strong stinging, burning sensation, or any severe discomfort during use, stop using immediately and consult a professional.

8. Weekly Care Plan Suggestions

WeekdaySuggested Mode CombinationUse TimeSpecial Focus Areas
MondayCleaning + Import10 minutesT-zone cleaning, full face import
TuesdayLifting + Cooling12 minutesJawline, cheek lifting
WednesdayRest Day-Basic skincare only
ThursdayImport Mode8 minutesFocus on dry areas
FridayCleaning + Lifting15 minutesFull face cleaning, contour lifting
SaturdayDeep Care15 minutesAll mode cycle use
SundayCooling5 minutesLarge pore areas

Personalized Adjustment Suggestions

You can adjust the care plan according to your skin type and needs. Sensitive skin: reduce frequency. Oily skin: increase cleaning mode use.

9. Key Operation Points Summary

Principles That Must Be Followed

1. Always start from the lowest level, gradually build tolerance
   2. Keep skin moist, avoid damage from dry pulling
   3. Move in one direction, especially in microcurrent mode
   4. Avoid prohibited areas: eyelids, throat, open wounds
   5. 2-3 times per week is appropriate, avoid overuse
   6. Persist for 4-8 weeks to see noticeable results
   7. Combine with daily skincare, device is an auxiliary tool

Absolutely Prohibited Actions

• Use in humid environments
   • Share probe with others
   • Use oily skincare products
   • Press too hard
   • Exceed recommended usage time

Expected Results

With consistent use 2-3 times per week, combined with healthy habits and sun protection, you will see noticeable improvement in skin texture and radiance within 4-8 weeks.

美容仪使用交互式向导

美容仪使用向导

跟随以下步骤,安全有效地使用您的美容仪。点击每一步查看详细说明和操作指南。


1
准备工作
2
开启仪器
3
选择模式
4
开始护理
5
结束保养

步骤1:准备工作

在使用美容仪之前,请做好以下准备工作,以确保使用效果和安全。

操作步骤:

皮肤检查:确认面部无开放性伤口、严重炎症或皮疹。
彻底清洁:用温和洁面产品洗净脸部,去除油脂和化妆品残留。
仪器检查:确认美容仪已充满电,探头干净无残留。
涂抹介质:在面部均匀涂抹足量配套凝胶或精华液,确保皮肤充分润滑。

视觉指南:

清洁面部时使用温和打圈手法
凝胶涂抹厚度应足以覆盖全脸
确保电量指示灯显示充足电量

小贴士

首次使用前,建议先在手臂内侧进行皮肤测试,确认无过敏或不适反应。确保双手干燥后再操作仪器。

步骤2:开启仪器

正确开启美容仪是安全使用的**步,请按照以下步骤操作。

操作步骤:

长按开机:找到电源键(通常位于机身侧面或底部),长按3秒直到指示灯亮起或听到提示音。
初始设置:首次使用可能需要选择语言或进行时间设置。
检查状态:确认所有指示灯正常显示,仪器无异常声音。
握持姿势:以舒适的方式握持仪器,确保手指不会误触其他按钮。

视觉指南:

长按电源键直到指示灯闪烁
开机通常伴有提示音
指示灯显示当前电量状态

重要安全提示

如果仪器发出异常声音、产生异常气味或指示灯异常闪烁,请立即关闭电源并停止使用。请勿在潮湿环境或手部潮湿时操作仪器。

步骤3:选择模式

根据您的护肤需求选择合适的功能模式,初次使用建议从最低档开始。

清洁模式
导入模式
提拉模式
冰敷模式

模式说明:

清洁模式:通过声波震动和导出功能,深层清洁毛孔污垢和残留化妆品。
频率:每周2-3次 | 时间:3-5分钟
导入模式:利用微电流和离子导入技术,促进护肤品成分渗透吸收。
频率:每天可使用 | 时间:5-8分钟
提拉模式:通过EMS微电流刺激肌肉运动,提升面部轮廓,减少细纹。
频率:每周3-4次 | 时间:每区2-3分钟
冰敷模式:冷却探头镇静肌肤,收缩毛孔,缓解敏感泛红。
频率:按需使用 | 时间:1-2分钟

模式选择提示:

干性/敏感肌:建议从导入模式开始,适应后再尝试其他功能
油性/混合肌:可多使用清洁模式,帮助控制油脂分泌
熟龄/松弛肌:提拉模式可重点使用在法令纹和下颌线区域

小贴士

初次使用任何新模式时,请务必从最低强度开始,让皮肤逐渐适应。每次护理可组合使用不同模式,例如:清洁→导入→提拉→冰敷,形成完整护肤流程。

步骤4:开始护理

掌握正确的手法和移动路径,让美容仪发挥**效果。

标准护理手法:

下颌至耳前:从下巴中央开始,沿下颌线缓慢向上移动至耳前,重复5-10次。
嘴角至耳中:从嘴角开始,斜向上提拉至耳中部,重复5-10次。
鼻翼至太阳穴:从鼻翼两侧开始,向太阳穴方向轻柔滑动,重复5-8次。
额头区域:从眉心上方向发际线平缓移动,再由中间向两侧滑动。
颈部护理:从锁骨向上至下巴,由下至上提拉,避开喉结区域。

手法要点:

轻柔贴肤:仪器应紧贴皮肤,但不要用力按压
缓慢移动:每个动作保持3-5秒,不要快速滑动
对称护理:左右两侧使用相同时间和次数
避开区域:眼周、喉结、伤口和炎症处请勿使用

重要安全提示

如果在使用过程中感到强烈刺痛、灼热感或任何不适,请立即停止使用。过度使用或用力过猛可能导致皮肤损伤。

小贴士

护理过程中可以适当补充凝胶,保持皮肤湿润。对于重点区域(如法令纹、抬头纹)可以适当增加护理时间,但每个区域不建议超过5分钟。

步骤5:结束保养

正确结束护理并妥善保养仪器,确保卫生并延长使用寿命。

结束步骤:

关闭仪器:长按电源键3秒,直到指示灯熄灭,确认仪器已完全关闭。
清洁面部:用温水洗净面部残留的凝胶或精华,然后进行日常护肤程序。
清洁仪器:用湿软布擦拭仪器探头和机身,确保无护肤品残留。
妥善存放:将仪器放入专用收纳袋或盒子,存放于干燥阴凉处。
充电提醒:如果电量低于20%,请及时充电。长期不用时每月充电一次。

清洁要点:

禁止水洗:切勿将仪器浸泡在水中或用水直接冲洗
避免化学品:不要使用酒精、溶剂或腐蚀性清洁剂
正确清洁:使用微湿软布轻轻擦拭即可
干燥存放:确保仪器完全干燥后再收纳

长期保养建议

建议每3个月检查一次仪器探头是否有磨损或损坏。如果仪器使用频率较高,建议每6-12个月联系售后进行一次专业检测和维护。

恭喜!您已完成全部护理步骤

坚持每周使用2-3次,配合健康的生活习惯和防晒,您将在4-8周内看到肌肤质地和光泽度的明显改善。

name:
Message:
Verification code:
submit
Comment
123...6