12 years of focus on beauty equipment-R&D&manufacturing of massagers-Shenzhen Honghe Business Co., Ltd
Location：
Home >
The implementation of the new safety standards for massage equipment in GB/T 4706.10-2024 is imminent, and the market impact and compliance strategies are fully interpreted
The implementation of the new safety standards for massage equipment in GB/T 4706.10-2024 is imminent, and the market impact and compliance strategies are fully interpreted
Replacing GB 4706.10-2008, which will be enforced on August 1, 2026, product design, channel access,
2026-07-11 07:11
📋 GB/T 4706.10-2024 Market Impact Report
Household and similar electrical appliances – Safety – Part 10: Particular requirements for massage appliances
📌 Executive Summary
GB/T 4706.10-2024 is a mandatory national safety standard for massage appliances, effective from August 1, 2026, fully replacing the old GB 4706.10-2008. The new standard imposes stricter requirements on electrical safety, mechanical structure, material flammability, and moisture resistance. It will drive the industry from basic compliance to high-quality safety. The transition period is less than two years, creating systemic impact on product design, CCC certification, and supply chains, while offering opportunities for technologically prepared companies to gain market share.
📄 1. Standard Basic Information
| Item | Details |
|---|---|
| Standard No. | GB/T 4706.10-2024 |
| Title | Safety of household and similar electrical appliances – Part 10: Particular requirements for massage appliances |
| Publication Date | 2024-07-24 |
| Effective Date | 2026-08-01 |
| Supersedes | GB 4706.10-2008 (full replacement) |
| Administrative Body | China Light Industry Council |
| Issuing Authority | State Administration for Market Regulation (SAMR) & Standardization Administration of China (SAC) |
🎯 2. Product Scope
This document specifies safety requirements for household and similar electrical massage appliances. It applies to single-phase appliances with rated voltage not exceeding 250 V and other appliances with rated voltage not exceeding 480 V for household or similar use.
Included product types (non-exhaustive):
- Foot massagers
- Hand-held massagers
- Massage beds
- Massage belts
- Massage chairs
- Massage pads
- Water-filled foot massagers
📌 Scope extension: Appliances not intended for general household use but which may still present a danger to the public, such as those intended for use in shops, light industry, and farms by non-experts (e.g., beauty salons or health centers), are also within the scope.
⚡ 3. Core Technical Changes vs. GB 4706.10-2008
The old standard (GB 4706.10-2008) identically adopted IEC 60335-2-32:2005. The new version aligns with the current IEC 60335-2-32:2019 Ed 5.0 and introduces six major technical upgrades:
- Live parts in water-filled foot massagers: All current-carrying parts in contact with water are considered live parts (the previous 36 V safety voltage exemption no longer applies).
- Accessible surface temperature rise: Clear limits for accessible surface temperature rise are now normative, with specific values for external surfaces.
- Hand-held appliance stability & mechanical strength: New stability requirements and mechanical strength tests for hand-held appliances.
- Flexible cord controllers: Massage chairs/beds may have controllers on flexible cords, but cord length is limited so the controller does not touch the floor (unless the controller contains no live parts).
- Moisture resistance enhancement: Added 1% saline solution spill and drainage test for water-filled foot massagers.
- Non-normal operation & fault simulation: More comprehensive motor stall and heating element failure testing to ensure single-fault safety.
💡 Key upgrade logic: The new standard tightens the "safety voltage" exemption and strengthens moisture, mechanical, and thermal controls, pushing design from basic protection to full safety redundancy.
🔬 4. Detailed Safety Requirements (Key Test Items)
In conjunction with GB 4706.1-2024 general requirements, the new standard includes the following core test categories:
| Test Category | Specific Requirements |
|---|---|
| Marking and instructions | Ratings, use instructions, warnings (especially for water appliances); additional warnings for heating elements in contact with skin |
| Protection against electric shock | No access to live parts during normal use and maintenance; basic and reinforced insulation |
| Power input and current | Deviation within allowable limits |
| Heating | Temperature rise limits under normal and abnormal conditions; limits for skin-contact parts; water temperature ≤ 50 °C for filled units |
| Leakage current & dielectric strength | Insulation performance at operating temperature; Class I stationary appliances ≤ 0.75 mA |
| Moisture resistance | Simulated condensation/splashing; saline spill test for water-filled foot massagers |
| Abnormal operation | Motor stall, heating element failure – no fire or shock hazard |
| Stability and mechanical hazards | Anti-tip protection; moving part protection (pinch/crush risk assessment) |
| Mechanical strength | Impact and drop tests for enclosure and critical structures |
| Construction, cords, grounding | Overall risk-proof design; cord specification and anchorage; effective grounding for Class I |
| Clearances, creepage, insulation | Sufficient distance between live parts and accessible metal parts |
| Resistance to heat and fire | Flammability rating (e.g., V-0 or equivalent) and heat resistance for critical non-metallic parts |
| Resistance to rust | Adequate corrosion protection for metal parts |
🔧 5. Impact on Existing Products
5.1 Product Design & R&D
- Water-filled foot massagers: All current-carrying parts in contact with water require basic or supplementary insulation; previous 36 V design no longer acceptable.
- Temperature control & materials: Normative surface temperature limits require revalidation of heating elements and thermal protection devices.
- Hand-held appliance reinforcement: New mechanical strength tests demand stronger enclosure and internal fixture design.
- Flammability upgrade: Non-metallic parts may need to meet V-0 or equivalent ratings, increasing material costs.
5.2 Inventory & Supply Chain
- Old-stock deadline: After 2026-08-01, non-compliant inventory cannot be sold domestically; accelerate clearance or rework.
- Supplier coordination: Motors, cords, PCBs, thermostats – upstream partners must upgrade processes; brand owners need re-qualification.
- Certification transition: All CCC certificates must be updated before the effective date; allow sufficient lead time for testing and modifications.
📈 6. Impact on Sales Channels & Market Trends
6.1 Channel Compliance Tightens
- E-commerce & retail: Platforms (Tmall, JD, Douyin) and offline stores will strictly verify CCC certificates and test reports.
- Market surveillance: Local regulators will conduct random inspections under the new standard; non-compliant products face removal and penalties.
- Channel consolidation: Small brands lacking R&D capability will be phased out, concentrating distribution among compliant players.
6.2 Future Market Trends
- Industry concentration: Higher technical barriers accelerate market exit; leading companies with R&D depth gain share.
- Value upgrade: Safety standards drive products toward "high reliability", shifting competition from price to quality and certification.
- Export-to-domestic adaptation: Export-oriented OEM/ODM producers must adjust designs for domestic mandatory requirements, increasing complexity and compliance costs.
🎯 7. Summary & Strategic Recommendations
Overall assessment: GB/T 4706.10-2024 represents a "safety upgrade" for the massage appliance industry. In the short term, it imposes compliance costs and supply-chain adjustments; in the long term, it fosters healthy industry development and enhances the safety reputation of Chinese-made massage appliances globally.
📌 Key action items for enterprises:
- Immediate gap analysis: Compare existing products against new technical requirements – focus on water-filled appliance insulation, hand-held mechanical strength, and material flammability.
- Transition plan: Complete CCC certification updates before 2026-08-01; reserve adequate time for testing and rework.
- Supply chain upgrade: Engage suppliers early on new material requirements (flammability, insulation).
- Inventory & channel strategy: Phase out old-stock in an orderly manner; design new products directly to the new standard to avoid channel disruptions.
Disclaimer: This article is sourced from original/reposted articles on the internet. The views expressed in this article only represent the author and do not represent the position of our website. This website only provides information storage space services and does not own or assume any legal responsibility. If the content causes infringement/illegal violation/factual inconsistency, please send the relevant information to honghebusiness@foxmail.com for complaint feedback. Once verified, handle immediately! This website link https://www.honghebusiness.com/en/news-industry/4496.html
Name：
Message：
Verification code： 
Submit
Comment
